Tray Adhesive 10ml - Coltene

COLTENE Adhesive is a universal adhesive for silicone-based dental impression materials and serves as an adhesive bonding agent between the impression material and the impression tray. Separation of the impression material during removal from the mouth can therefore be prevented.

A thin layer of COLTENE Adhesive ensures adhesion of tray material to the tray sides.

Features:

• Fast setting
• Easy application

Indications:

• Adhesion of tray material to the impression tray

Directions of use:

• STEP 1: Select and/or prepare a suitable tray. Prior to application of Caulk Tray Adhesive, trial fit tray for proper fit and extension.
• STEP 2: After proper fit is assured, rinse and thoroughly dry tray.
• STEP 3: Brush a thin layer of Caulk Tray Adhesive onto the tray surfaces that will be covered with impression material and allow to air dry for at least five minutes, but no more than 30 minutes. Repeat application if greater than 30 minutes have elapsed.
• STEP 4: Mix and place desired tray viscosity impression material directly into coated impression tray as per selected impression material directions.

Technique Tip: Avoid placement of excess adhesive onto tray surfaces. Retention will NOT be enhanced and may be compromised by placement of a thicker layer of tray adhesive onto tray surfaces.