Jet Bite 2x50ml - Coltene

Jet Bite is an A-silicone-based impression material for use in dentistry with an automatic mixing device. Easy handling and ideal stability facilitate the bite registration

Perfect Bite registration - without occlusal adjustments. Jet Bite gives the perfect occlusal fit on the first try. The patient bites down naturally every time because of Jet Bite fast's fluffy, mousse-like consistency. There is no need for time-consuming adjustments. Jet Bite flows smoothly - sets rock hard.

Indication:

• Impression material for bite registration: registration of centric occlusion

Features:

• Smooth mousse-like consistency - No resistance to closure, no rebound
• High dimensional stability - No distortion
• Less brittle - Easy to grind and cut
• Saves time - Minimizes occlusal adjustments
• Jet Bite fast 70 seconds total working time: Working time maximum 20s, Oral setting time minimum 50s

Directions of Use:

• Dispense the bite registration material directly onto the occlusal surface of the lower teeth and move mandibula into central occlusion
• Always check intraorally if the material has set before removing the registration
• High temperatures accelerate and low temperatures slow down setting
• Inspect the models for projections (bubbles) from voids in the impression
• Remove these bubbles before articulating the models since these projections may prevent the proper seating of the bite registration
• Once the impression of the bite has set and has been removed from the mouth, it is vital that all gingival contact be trimmed down with a sharp knife to remove any undercuts
• Trimming the bite registration in this manner will prevent any rebound when the models are articulated
• Removing the gingival contact will also permit visual inspection to make certain that the bite registration is properly seated
• The material may be used in the 'closed mouth' or 'preoccluded' technique
• Guide the patient into centric before applying JET BITE